Introduction
By providing standalone smoke detection and alarm capabilities, independent smoke detectors play a crucial role in early fire warning and occupant safety, particularly in residential and small commercial environments.
An independent smoke detector, also known as a standalone smoke alarm, is a self-contained fire detection device.
The primary purpose of an independent smoke detector is to provide early warning of a fire by sensing the presence of smoke in the immediate vicinity.
Power Source:
Independent smoke detectors are typically powered by batteries.
Alarm Notification:
When smoke is detected, the independent smoke detector will activate its own internal audible alarm to alert occupants in the local area.
Installation and Placement:
Independent smoke detectors are designed for standalone installation, without the need to integrate with a centralized fire alarm system.
They are typically installed in individual rooms, hallways, or other specific areas within a building, based on fire safety guidelines and local regulations.
Applications:
Independent smoke detectors are commonly used in residential settings, such as homes and apartments, where a comprehensive fire alarm system may not be present.
They can also be appropriate for small commercial or industrial spaces that do not warrant a full-fledged fire alarm system.
Maintenance and Testing:
Independent smoke detectors require regular testing and maintenance, such as battery replacement, to ensure proper functionality.
Parameters
| Product Name | Standalone smoke detector | Work Voltage | DC3V(2*1.5V) |
| Volume | ≥80db | Battery | 950mah/1.5V*2 |
| Battery life time | Around 1 year | Work temperature | -10°C~+50°C |
| Output | Sound and light | Humidity | ≤95%. |
| Product standard | CE | Dimension | 110mm*50mm,
around 150g(with battery) |
Installation
1. Fix the detector chasis on the ceiling with screw.
2. Open the detectors upper case, assemble the battery and fix the detector on the chasis.
2. Press test button to perform self-test to make sure it work well.
3. Smoke detector inspection: perform usual inspection to make sure it work well. normally,
the indicator light will blink every 2 seconds. When the smoke density exceed the standard, it will send out firm alarm.
4. Battery inspection: if the battery voltage is too low, it will sound lightly every 1 minute till
the battery run out of energy.
Product Range
Conventional Fire Alarm System
Addressable fire alarm system
Gas Extinguishing control system
Beam Detector
4 wire smoke detectors with relay output.
2 wire Conventional smoke and heat detectors
Explosion-proof flame detector for fire alarm system
Standalone smoke detectors and combustable gas detector
Service
1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.
